Advertisement
Step 31
(Hydraulic Hose Assembly)
Locate the hydaulic kit and the quarter turn shut off valve. Attach the hoses and shut off valve to the left side of
the infeed housing using (2) 1/2" hose "P" clamps & (2) 1/4" x 3/4" flange bolts & nuts as shown in figure 31.1.
Run hose up left hand side auger tube attaching it the weld on studs using 1/2" hose "P" clamps & 1/4" flange
nuts. Leave a little slack between each stud. Run the house on the inside of the carriage mount bracket as
shown in figure 31.2.
Harvest by Meridian H10XX Assembly Manual
Fig. 31.1
Fig. 31.2
Page 20 of 34
Advertisement
