Advertisement
Step 2
(Tube & Flighting Assembly)
Place tubes on assembly stands as shown. Place stands 12" or less from the end of the tube. Placing stands
further than 12" from end of the tube may cause damage to the tubes.
Step 3
Slide the flighting together from the 1
top lock nuts. Align flighting as shown to make contineous. After connecting the flighting, slide the 1
tube together putting in the top 2 & bottom (2) 1/2" x 1-1/2" flange bolts & nuts. If assembling an H1082, snug
up the top bolts as they will need to be removed in step 5. If assembling H1082, after completeing Step 3 please
skip to Step 5.
Step 4
Place the left (10192) & right (10193) bolt on cable truss mount brackets onto the tubes & using (4)
1/2" x 1-1/2" flange bolts & nuts. (Note: The left bracket will have a small notch cut into the top of it) Tighten
all 8 bolts around tube flange. Skip to Step 6.
Harvest by Meridian H10XX Assembly Manual
Fig. 2.1
st
nd
& 2
tube. Connect the flighting using (2) 1/2" x 2-1/2" hex bolts and
Fig. 3.1
Fig. 4.1
st
nd
& 2
Page 4 of 34
Advertisement
