Advertisement
Step 52
Locate the swing tube hold down plate & the 4 hold down spacers. Install the hold down plates & spaces using
(4) 3/8" x 1-1/2" flange bolts & flange nuts. Tighten all 4 fasteners.
Fig. 52.1
Step 53
Next the wheel will be installed on the swing hopper. First, locate the 4 hopper tires (30104), 4 clevis pins, 4
spacer tubes (10186) & 4 lynch pins. Place the spacer tube through the first hole in the outside of the swing
hopper. Slide the clevis pin through the tire and the spacer making sure the offset part of the rim is facing in
towards the swing hopper as shonw in fig. 53.1. Secure the spacer, tire, & clevis pin by placing a 3/16" lynch
pin through the end of the clevis pin. Repeat for all 4 hopper tires. (For more ground clearance install the tire in
the bottome hole.)
Fig. 53.1
Harvest by Meridian H10XX Assembly Manual
Page 32 of 34
Advertisement
