Time Waveform Measurement Definitions - Allen-Bradley Dynamix 2500 User Manual

Hide thumbs Also See for Dynamix 2500:
Table of Contents

Advertisement

Chapter 3
Setting Up Measurements
Table 32 - Collection specifications for spectrum measurement definitions
Transducer
Window
Accelerometer
Hanning
Accelerometer
Hanning
Accelerometer
Hanning
Table 33 - Transducer specification in spectrum collection specifications
Name
Accelerometer
98
The following table shows the collection specifications (in the same order as the
measurement definition table above).
Signal Detection
Fmax
Peak
2 kHz
Peak
10 orders
Peak
2 kHz
The following table shows the transducer specification in the collection
specifications.
Base Unit
Input Type
Acceleration
ICP Accel

Time Waveform Measurement Definitions

The Emonitor software and the Dynamic 2500 data collector support time
waveform measurement definitions. This topic lists the unique characteristics of
the Dynamix that you may need to know when setting up and collecting time
waveform data.
The Dynamix 2500 data collector cannot collect phase with time waveform
measurement definitions. You can choose to have the instrument collect a time
waveform only if a magnitude measurement at the same location is in alarm.
TIP
The Dynamic 2500 data collector supports integrated time waveform
measurements (single integration). This means you can collect a time waveform
with velocity units using an accelerometer or displacement units using a velocity
transducer.
The length of the time waveform depends on the maximum frequency you select
in the collection specification. You can calculate the number of time samples from
the number of spectral lines (Collection Specification dialog box) using this
formula.
time samples
You can calculate the total time required to collect a time waveform measurement
from the Number of lines value and the Maximum frequency value in the
Collection Specification dialog box (Setup > Collection Specification).
Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
Lines
Phase
400
No
400
No
400
No
Units
g's
Set the Collect and store condition in the Edit Storage Specification
dialog box to On Magnitude Alarm for the storage specification for the
time waveform measurement definition.
=
spectral lines 2.56
Order Norm?
Averages
No
4 linear
Yes
4 linear
No
4 time synch.
Calibration Value
DC Offset
100
0

Advertisement

Table of Contents
loading

Table of Contents