Table of Contents
Advertisement
Install USB Drivers
You can communicate between the Dynamix 2500 data collector and your
computer by installing specific USB driver files.
When you connect Dynamix 2500 data collector to a computer for the first time,
the computer identifies new mobile device hardware. The instrument requires a
USB driver installed on you computer. Once you have installed the driver, it will
not be required to be installed again
Follow these steps to install the USB driver files.
1. From the Dynamix 2500 data collector product CDROM USB Driver
folder, run the USB driver setup wizard.
2. From the Start menu, choose CMC USB Driver/Install.
Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
Configuring the Dynamic 2500 Data Collector
Chapter 2
31
Advertisement
Table of Contents
