Dynamix 2500 Data Collector And The Emonitor Software; Software Compatibilities; Usb Driver And Communication Software; Operating System - Allen-Bradley Dynamix 2500 User Manual

Hide thumbs Also See for Dynamix 2500:
Table of Contents

Advertisement

Preface
Dynamix 2500 Data
Collector and the Emonitor
Software

Software Compatibilities

Document Conventions

10
The terminology in the data collector and the software differ in several ways.
This table illustrates the differences.
Table 1 Terminology Differences
Dynamix 2500 Terminology
Offroute
Measurements that are taken but are not
downloaded on to the instrument from Emonitor.
These measurements can be upload to Emonitor.
Route
The Dynamix 2500 data collector uses the term
route' to refer to a list loaded in the data
collector.
The Dynamix 2500 data collector requires the following software versions.

USB Driver and Communication Software

• USB communication with Microsoft Windows 2000 and Windows XP is
supported using Microsoft ActiveSync software version 4.5 or greater
• USB communication with Microsoft Windows 7 is supported using
Microsoft Mobile Device Center
• Microsoft Windows 7 32 bit and/or Microsoft Windows 7 64 bit are
supported

Operating System

• Microsoft Windows 2000 (SP4) with ActiveSync software
• Microsoft Windows XP (SP3) with ActiveSync software
• Microsoft Windows 7 with Mobile Device Center software installed
These are document conventions used in this manual.
• The Dynamix 2500 data collector is referred to as a data collector and an
instrument in this manual.
• The different versions of the Emonitor software are Enterprise, Factory,
and Workstation. These are all are referred to as the Emonitor software in
this manual.
• The Emonitor software screen captures are from version 3.4 and reference
the Enpac 2500 data collector. The next version of the Emonitor software
and this manual will reflect the name Dynamix 2500 data collector.
Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
Emonitor Terminology
Unscheduled measurements
Measurements that are not defined in the list of
measurements downloaded by Emonitor.
These measurements are unscheduled.
List
The Emonitor software uses the term 'list' for an
ordered set of measurement definitions.

Advertisement

Table of Contents
loading

Table of Contents