Table of Contents
Advertisement
Table 13 - Setup Screen Parameter Descriptions
Parameter
Description
Transducer Change
Notification of a transducer change.
If set to Warn, a prompt appears on the screen warning you of the
transducer change.
Bias Check
The bias of the transducer before taking the measurement.
Module ICP
The Module ICP option allows the manual control of turning off/on ICP
power to transducers in application modules.
Language
Sets the language for the user interface.
Configure the Data Collection Options
The data collection options affect the measurement, the data collection process,
and how the data displays on the Dynamix 2500 data collector. The instrument
stores the data collection settings even when the instrument is powered off.
However, you should check these options each time you start data collection.
Follow these steps to download a Route onto the data collector using the
Emonitor software.
1. Using the Route Manager, select an appropriate route and press Enter.
Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
Configuring the Dynamic 2500 Data Collector
Value
Warn (default)
Do not warn
Manual (default)
Automatic
Never
Always
Auto
Chinese
English
Francais
Deutsch
Italiano
Portuguese (Brasil)
Russkiy
Espanol (Spain, traditional)
Chapter 2
57
Advertisement
Table of Contents
