Table of Contents
Advertisement
Unloading Lists from the
Data Collector
4. Click About data collector driver.
This displays the driver version number.
5. Click OK to close the Data Collector Functions dialog box.
TIP
Once you collect data you can unload it for storage in your the Emonitor
software database by connecting the Dynamix and computer and transferring the
information. You can unload unscheduled measurements to your the Emonitor
software database at the same time as list data. You can automatically print
reports after unloading data from the data collector.
IMPORTANT
IMPORTANT
Unload More than One List
The Dynamix 2500 Data Collector lets you to unload more that one list at a time
into the Emonitor software database. Simply select the desired lists before
clicking Unload.
For more information, see
Clear Data from a List
The Dynamix 2500 Data Collector lets you to clear data from a list in the
instrument after unloading it to your the Emonitor software database. You can
collect the list again as needed:
• Check the Clear list on unload checkbox in the Unload Options dialog
box.
• Clear data from list function in the Data Collector Functions dialog box.
Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
The SD storage card must be initialized/formatted before you can use it
in the data collector. The data collector does not initialize/format the
cards.
When loading large lists to the Dynamix 2500 Data Collector,
recommended practice is to connect the power supply to the Dynamix
2500 Data Collector. This disables the automatic timeout feature
(Instrument Setup), which could cause potential loss of data during
the loading process.
For more information on unloading lists and unload options see the
Emonitor software online help.
Select the Lists on page
Loading and Unloading
Chapter 4
118.
121
Advertisement
Table of Contents
