Table of Contents
Advertisement
See
Engineer Mode Menu on page 44
using the Dynamix 2500 data collector.
IMPORTANT
Follow these instructions to automatically initialize the data collector before
loading a list.
1. Choose Tools > Load/Unload.
2. In the Load/Unload dialog box, click Load Options.
The Load Options dialog box appears
Check to
automatically
initialize.
3. Check the Initialize data collector before loading checkbox.
4. Click OK.
You must have the Dynamix 2500 data collector connected to the computer. You
can also use the unit to initialize memory.
TIP
Follow these steps to manually initialize the data collector any time.
1. Choose Tools > Load/Unload.
2. Click DC. Functions in the Load/Unload dialog box.
Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
for details on how to initialize memory
Initializing the data collector memory erases the existing data. Be
sure that you no longer need the data before deleting it.
.
If you are manually initializing the memory card, you must also
have the SD card in the drive.
See
Insert and Remove a Storage Card on page
Loading and Unloading
Chapter 4
64.
115
Advertisement
Table of Contents
