Table of Contents
Advertisement
7. Select Input Channel and press the Right arrow to display the input
channel choices.
8. Select the channel and press the Left arrow key.
See
Connector A and Connector B Inputs on page 19
information on the connectors and related channels.
9. Change the other parameters as needed.
See
Offroute User Parameters on page 156
You can also set the Acquisition parameter in the Instrument
Configuration screen to Single Shot or Continuous.
– In Single Shot mode, the unit halts when the data collector has settled
and the data is stable.
– In Continuous mode, the unit constantly analyzes and displays the
moving signals until you store the data by pressing the Enter key.
See
Instrument Configuration Parameters on page
10. You are now ready to collect the dual channel measurement.
See
Collect a Cross Channel Phase Measurement on page
Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
Multi-channel Measurements
for complete
for assistance.
59.
188.
Chapter 6
195
Advertisement
Table of Contents
