Table of Contents
Advertisement
Chapter 2
Configuring the Dynamic 2500 Data Collector
Updating the Operating
System
34
Download the Dynamix 2500 .zip upgrade file from
http://www.rockwellautomation.com/support/. Choose Downloads > Firmware
Updates > Condition Monitoring.
We recommend that you delete all older versions of the installer loader
IMPORTANT
.msi files from your computer before updating the Dynamix 2500 data
collector's operating system.
You can load the operating system/firmware from Dynamix 2500 data collector
product CD by using the USB connection. Use the Dynamix 2500 OS Loader
application on the product CD or at
http://www.rockwellautomation.com/support/firmware.html
To use the Dynamix 2500 OS Loader application, the following must be installed
on your computer:
• Microsoft's ActiveSync software
Communication is supported through the USB port using Microsoft
ActiveSync software version, 4.5 or later.
If you have not installed ActiveSync software, see
Mobile Device Center Software on page 30
• USB Drivers
If you have not installed the USB drivers for your Dynamix 2500 data
collector, see
Whenever you rerun the OS Loader software, you will reload only the
IMPORTANT
main OS firmware. The OS loader will back up licence files and data, but
not the optional extension modules. Once you have updated the OS
firmware, install the latest version of your optional extension modules.
Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
Install USB Drivers on page 31
Install ActiveSync or
for more information.
for more information.
Advertisement
Table of Contents
