Configuring Time - Agilent Technologies 7820A Service Manual

Configuring time

170
Agilent 7820 GC Service
Zero the pressure sensors.
Configure the gas types and control mode.
a Press [ Config] , then scroll to the correct PCM entry ( PCM
A or PCM B ).
b Scroll to Gas type and use the [ Mode/Type ] key to set
the gas type connected to the PCM's Channel 1 .
To localize the date/time stamp in the Run and Event logs, use
this procedure.
1 Press [Config][Time] .
Enter the offset from Greenwich Mean Time using 24-hour
format. Press [Enter] .
Enter the local time (24 hour format). Press [Enter] .
Enter the date, in ddmmyy format. Press [Enter] .