Typical Values - Agilent Technologies 7820A Service Manual

Agilent 7820 GC Service
149

Typical values

The following are typical values for the detector results. The
results for a detector depend on site preparation related factors.
These are not pass/fail criteria.
Agilent ChemStation
Noise ([N3])
Measured by ChemStation, ASTM [N3] 4 Hz
Signal
Area, Lindane peak
3396B or 3396C or 3397A integrator sample conditions with
analog input [GC Analog output, Range 0]
>>Set DATE and TIME<<
GC Analog output
Noise ([N1])
Measured at [GC Range 0],
[3396 Attn. 3, Chart speed 1, zero
50]
Signal
GC Range 6
3396
Zero 10
Att 2^ 5
Cht sp 1
Ar Rej 100000
Area, Lindane peak
6700
40 mm (for 1 min measurement)
Pk wd 0.04
Thresh 5
Stop time 11.0
43000