Replacing The Split/Splitless Inlet Split Vent Line - Agilent Technologies 7820A Service Manual

Agilent 7820 GC Service
27
Guide the top weldment assembly carefully through any
interfering wiring and/or tubing to remove it from the GC.
Reassembly is the reverse of these steps.
Replacing the split/splitless inlet split
vent line
1 Turn off all gas flows at their sources.
Turn off the GC main power switch.
Components can be damaged by static electricity:
be sure to wear an ESD strap grounded to the GC
chassis while performing this procedure.