Inlet/Detector Heater Harness - Agilent Technologies 7820A Service Manual

Inlet/Detector heater harness

Agilent 7820 GC Service
187
Part number G4350-60535
This harness connects the inlet and detector heaters to the logic
board at P7.
The FI and BI connectors are for inlets; FD and BD are for
detectors. (FI = Front Inlet, BD = Back Detector, and so forth)
Connection table
S1 pin Wire color
1 Black
2 Black
3 Black
4 Black
5 Green
6 Green
7 Green
8 Green
9 Violet
10 Gray
11 Violet
12 Grey
13 Red
14 Orange
15 Red
16 Orange
Signal name
ADC-GND
ADC-GND
ADC-GND
ADC-GND
C GROUND
C GROUND
C GROUND
C GROUND
INJA-SENSE
INJB-SENSE
DETA-SENSE
DETB-SENSE
INJ-FRONT
INJ-BACK
DET-FRONT
DET-BACK
Destination
(pin)
F1 (3)
BI (3)
FD (3)
BD (3)
FI (4)
BI (4)
FD (4)
BD (4)
FI (2)
BI (2)
FD (2)
BD (2)
FI (1)
BI (1)
FD (1)
BD (1)