Cable Pinouts, Gc To 3395B/3396C Integrator; Automatic Sampler For Gc - Agilent Technologies 7820A Service Manual

Automatic sampler for GC

Agilent 7820 GC Service
177
Cable pinouts, GC to 3395B/3396C
Integrator
Connector
1 Signal name
9 pin
(male)
1 GND
2 Prepare
3 Start
4 Start relay
5 Start relay
6 No connection
7 Ready
8 Stop
9 No connection
There are two connectors, ALS Port Front and ALS Port Back,
for the 7693A Injector (G4513A). The injector should be installed
in the connector for the inlet in use, however, the GC should
automatically determine where the injector is installed regardless
of the connector used.
The cable part number is: G4514-60610
Connector 2
15 pin (male)
9 — Ground
No connection
3 — Start in
No connection
No connection
No connection
14 — Ready out
4 — STOP2 In
No connection