7820 Gc/Ms Second Inlet Upgrade Harness - Agilent Technologies 7820A Service Manual

7820 GC/MS Second Inlet Upgrade Harness

Agilent 7820 GC Service
191
20
Available connections
Connector
EPC1
EPC2
EPC3
EPC4
F-DET
B-DET
Part number G4350-60536
Use this cable to connect to an MSD transfer line if the 7820A
GC has a back inlet installed. This cable connects to the analog
and power board (at P22). (Normally, an MSD transfer line uses
the back inlet heater connector.)
Connection table
S1 pin Wire color
1 Violet
2 Green
3 No
connection
White/Black Yes
Use
Front inlet EPC module or
PCM
Back inlet EPC module or
PCM
Front detector EPC module
Back detector EPC module
Front detector signal
board
Back detector signal board
Destination Signal
(pin)
MS (2) Aux1-Sense
MS (4) Heater COM
F DET (4)