6
Positioning mode
6.9.2
Jog mode via Festo Configuration Tool (FCT)
The jog mode can be manually controlled via the interfaces "Jog<< (–)/Jog>> (+)" in the FCT window "Pro-
ject output" in the online tab "Manual move".
1
Manual Move
2
<<: Jog in negative direction
Fig. 6.28 Manual jog via Festo Configuration Tool (FCT)
172
1
2 3
3
>>: Jog in positive direction
Festo – GDCP-CMMS/D-FW-EN – 1404NH – English