Camera Connections; Remove The Back Cover - FLIR PT-606Z HD Installation Manual

1 PT-Series HD Camera Installation
1.6
1.6.1
Use a 2.5 mm hex key to loosen the
captive screws and remove the cover,
exposing the connections at the back of
the camera. There is a grounding wire
connected between the case and the
back cover
Not used
Serial Connector
for local control
Analog Infrared
Video
427-0075-01-12 Version 110

Camera Connections

Remove the Back Cover

IP Network
Figure 1-4: PT-Series HD Camera Connections
Analog Video
(monitoring output only)
November 2017
Analog Visible Video
Camera Power
Heater Power
11