Table of Contents
Advertisement
3.3 System Cable Connectors
The camera is shipped with a system cable for network, power, I/O, and audio connections. The figure
below shows the various connectors included in the system cable of the camera. The connectors, pin
numbers and signal definitions are listed below.
Cable
Pin No./ Connector Type
Ethernet
RJ45, Network LEDs
Audio In
3.5mm audio plug (pink)
Audio
3.5mm audio plug (green)
Out
Video
BNC
1- Power (+)
Power
2- Earth GND
3- Power (-)
DI - Input (+)
DI - Input (-)
Alarm
DO - Output (+)
DO - Output (-)
April 25, 2017
Figure 10: CB-5222 Camera Input/Output Connections
Definition
10/100/1000Mbps
Ethernet/PoE/PoE+
Line in
Line out
Analog video
12VDC/24VAC
Alarm input
Alarm output
CB-5222 User and Installation Guide
Introduction to the CB-5222 IP Bullet Camera
Description
For network, Power over
Ethernet (PoE), or PoE+
connection
For connecting line-level audio
input or microphone with built-in
pre-amplifier
For connecting headphone or
loudspeakers with built-in
amplifier
For video output
3-terminal connection block
4-terminal connection block
13
Advertisement
Table of Contents
