FLIR PT-606Z HD Installation Manual page 27

2 Basic Operation and Configuration
Video
By default, two video streams are enabled for each camera: Video 0 and Video 1 are sourced from the
DLTV camera, Video 2 and Video 3 are sourced from the IR thermal imager. All video streams are
available for viewing from a client program such as FLIR Latitude, a stand-alone video player, or a
third-party VMS (including ONVIF systems).
To modify parameters that affect a particular IP Video stream from the camera, select the appropriate
link (for example, Video - 0).
The default parameters provide high-quality full frame-rate video streams with reasonable bandwidth
usage. In general, for most installations it will not be necessary to modify the default parameters. In
some cases, such as when a video stream is sent over a wireless network, it may be useful to adjust
the frame rate of the video stream to reduce the required bandwidth.
Select video format
427-0075-01-12 Version 110 November 2017 27