FLIR PT-606Z HD Installation Manual page 10

1 PT-Series HD Camera Installation
Step 4
Step 5
427-0075-01-12 Version 110
Secure the camera using 5/16" or M8 fasteners (4x) with stainless steel flat washers and
split washers on top of the nylon washers.
Ensure the camera is properly grounded. FLIR requires using a 14 AWG to 16 AWG
grounding strap anchored to the ground lug on the back plate of the camera housing and
then terminated to the nearest earth-grounding point.
Figure 1-3: PT-Series HD Galvanic Isolation Kit (PN 4204960)
M8 or 5/16" fasteners (not supplied)
4 places, minimum length 1 in.
(dependent on mounting structure)
isolation plate
example mounting structure
(FLIR PN 500-0461-00)
November 2017
If using nylon flat washers,
apply a generous coat of Tef-Gel
filling all gaps and voids.
(4 places)
M8 split lock washer (4 places)
M8 flat washer (4 places)
M8 nylon shoulder washer or
nylon flat washer (4 places)
If using nylon flat washers,
apply a generous coat of Tef-Gel
filling all gaps and voids.
(4 places)
10