Table of Contents
Advertisement
Alphabetical Reference
Default Route
•
•
•
•
•
Default SNTP IP
•
•
Default VLAN ID
•
•
DHCP
•
•
•
•
Display Test
•
•
DLS Server Port
•
DLS Server Address
•
62
Enter the
IP address that was assigned to your
DHCP server assigns this value dynamically.
If the value was assigned dynamically, it can only be read.
A restart is necessary after the change.
Standard value
page 96.
IP editor in the optiPoint 410/420
page 22
page 17
This entry is only required if you selected "SNTP" in the
field.
Enter the
IP address of the
page 57
Can be defined only if the
Enter a value from 0 to 4095 here. This value describes the association
with a certain VLAN, if a
page 22
page 17
Activate this option if the required IP data of the telephone should be
assigned dynamically by a
If no DHCP server is available in the IP network, please deactivate this
option. In this case, the data corresponding to the
dress,
Terminal Mask and
ally.
A restart is necessary after the change.
Standard value
page 96.
page 21
page 17
Conduct this test to check the function of the
play telephone.
Different display contents are displayed with the
page 25
Enter the
Port-Number for communication with the
page 56
Enter the
IP address of the
page 55
page 93.
page 52
SNTP server.
Layer 2 support is activated
VLAN is used.
page 52
DHCP server.
Default Route must be defined manu-
page 52
DLS-Server.
Description of functions
PBX if no
Time Source
QoS L2/L3.
Terminal IP Ad-
LCD display in the Dis-
<
>
and
keys.
DLS-Server .
Advertisement
Table of Contents
