Siemens 2000 Administration Manual page 72

Alphabetical Reference
LDAP Template Filename
•
•
•
•
•
LED Test
•
•
Line Status
•
•
•
•
72
Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
If an LDAP server is used, enter the name of the LDAP template file
that is used in connection with this server.
The file must exist in a defined directory on the
Server Address).
Standard name page 96.
Datei downloaden
page 50
Conduct this test to check the function of the
optiPoint 410/420 zu prüfen.
All the LEDs blink during the test.
page 25
Activate the display to view the functions and values used to run the
LAN connections in the optiPoint 410/420.
Bit rate, activity, half / full duplex, as well as the status of the used net-
work or the manual setting in the optiPoint 410/420.
The display takes place through the
[
Port Function
[1]]
PC Activity
Speed
Duplex
(no function)
LAN Activity
Speed
Duplex
(no function)
[1] See page 12.
The status monitor remains active even during the normal operation of
the optiPoint 410/420. However, it does not affect the operation of the
function keys.
page 28
Action On Submit
LEDs of the right row:
LEDs on optiPoint 410/420 (right row)
LED1 Not Active
LED2 10 Mbit/s
LED3 Half-Duplex
LED4 -
LED5 Not Active
LED6 10 Mbit/s
LED7 Half-Duplex
LED8 -
Description of functions
FTP server ( FTP
LED in the
Active
100 Mbit/s
Full-Duplex
-
Active
100 Mbit/s
Full-Duplex
-