Siemens 2000 Administration Manual page 74

Alphabetical Reference
Minimal Session Length
•
•
National Dial Prefix
•
•
Non-Compressing Codec Threshold Values
•
•
Observation Interval
•
•
Packet Size
•
•
Phone Identity
•
PING Test
•
•
74
for QDC (QoS Data Collection)
Standard value page 96.
page 54
Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
Canonical format
page 47
Non-Packed Codec
Explanation page 61.
page 54
For each observation intervall a threshold exceeding will be checked.
Standard value page 96.
page 54
The packet size will be expressed in time units. Available are the values
Auto, 10 ms und 20 ms.
Standard value page 96.
page 49
Displays the Phone Identity of the optiPoint 410/420.
page 45
Conduct a PING test to check whether a server or another terminal
device (e.g., the optiPoint 410/420) can be reached in the network.
Available Addresses:
– User specified IP
– Gateway address
– Default route
– Route 1 Gateway
– Route 2 Gateway
– SNMP address
– DLS address
– QCU address
For this, enter an
which you wish to test.
page 27 page 49
page 83.
IP address as the test target, the connection to
Description of functions