Table of Contents
Advertisement
Description of functions
LAN Port Settings
•
•
Language
•
•
•
•
LDAP Server IP Address
•
•
LDAP server Port
•
•
•
Here you must define the bandwidth at which the optiPoint 410/420
should be run. The required value depends on the bandwidth that the
switch or router supports in the network.
Bandwith
Possible application
Auto
in standard case
10/Full
in 100 Mbit networks in full duplex
10/Half
in 10 Mbit networks with half duplex
100/Full
in 100 Mbit networks in full duplex
100/Half
in 10 Mbit networks with half duplex
[1] Up to a date, the data can be simultaneously transmitted and received.
[2] Up to a date, the data can only be transmitted or received.
A restart is necessary after the change.
page 23
page 52
Configurable on optiPoint 410/420 standard/advance only.
Select the language that should be used for local applications here.
Available languages: English, German, French, Italian, Spanish, Portug-
ese, Dutch.
Standard value
page 96.
page 48
Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
If an
LDAP server is being used, enter the
er here.
page 47
Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
If an
LDAP server is being used, enter the
communication with this server.
Valid values: 1 ... 65535.
page 47 and
page 56
Alphabetical Reference
[[1]]
process
[[2]]
process
[1]
process
[2]
process
IP address of this serv-
Port number here for
69
Advertisement
Table of Contents
