Table of Contents
Advertisement
Alphabetical Reference
SNMP Server Address
•
•
SNMP Trap Port
•
SRSR Automatic Switch Back
•
SRSR Enabled
•
•
SRSR Switch To Home Expiry Timeout
•
•
•
SRSR Switch To Home Retry Count
•
•
•
SRSR Switch To Standby Expiry Timeout
•
•
•
78
If an
SNMP server exists in the network, enter the
this server here.
Standard address
page 53
Define the
Port here through which the
should be transmitted.
page 53
Activate this checkbox for executing automatical change between
standby mode (emergency mode) and home mode (standard mode) of
the communication plattform.
page 57
Activate this checkbox if two communication plattforms are used
(Main-PBX und Standby-PBX).
Gateway Address and
must be entered
page 57
Required waiting time for change from standby mode (emergency
mode) to home mode (standard mode). During this time a switch over
is not possible.
Valid values: 1 ... 255.
Standard value
page 96.
page 57
Maximum number of negative attempts for switching over from home
mode (standard mode) to standby mode (emergency mode).
Valid values: 1 ... 255.
Standard value
page 96.
page 57
Required waiting time for change from home mode (standard mode) to
standby mode (emergency mode). During this time a switch over is not
possible.
Valid values: 1 ... 255.
Standard value
page 96.
page 57
page 96.
Subscriber Number of the Standby
page 55.
Description of functions
IP address of
SNMP error messages
PBX
Advertisement
Table of Contents
