Siemens 2000 Administration Manual page 39

optiPoint display module
Step by Step
Configuring the LDAP Server
Perform the following steps to enter the LDAP server IP
address and port number:
1. Start the Web-Based Management Tool, see
page 43.
2. Select "Administration" > [password] > "Applica-
tions" > "LDAP", see
3. Enter the IP address of the LDAP server, see
page 69.
4. Select "Submit".
5. Select "System" > "Port Settings", see
6. Enter the port number for communication with the
LDAP server, see
7 . Select "Submit".
Installing the LDAP Template
A standard template is already installed. You can
also install a template that corresponds to your
personal criteria. See
of this template.
Perform the following steps to transfer a template to
your optiPoint display module:
1. Make sure that an FTP server is available (see
page 89) and that the relevant template file is
stored on the server.
2. Start the Web-Based Management Tool, see
page 43.
3. Select "Administration" > [password] > "File Trans-
fer", see page 50.
4. Enter the following parameters:
– FTP server address, see
– FTP account name, see
– FTP username, see
– LDAP template filename, see
5. Select "Download LDAP template" from the "Action
on submit" field, see
6. Select "Submit".
Administration
page 47.
page 69.
page 70 for an example
page 64
page 64
page 65
page 72
page 58.
page 56.
39