Activating Tone Dialing/Dtmf Suffix-Dialing; Automatic Connection Setup (Hotline) - Siemens HiPath 500 Operating Instructions Manual

Making Calls
Step by Step
Program/Service
>
*53=DTMF dialing?
36
Activating Tone Dialing/DTMF Suffix-
Dialing
You can transmit dual-tone multifrequency (DTMF) sig-
nals to control devices, such as, an answering machine
or automatic information system.
Press the key. The LED lights up.
:
Select and confirm
or
qig
Enter the code.
o
You can use the keys "0" through "9", "
mit DTMF signals.

Automatic Connection Setup (Hotline)

If this function is configured (contact your service per-
sonnel), the system automatically sets up a connection
to a preset internal or external destination.
n
Lift the handset.
Depending on the setting, the connection is either set
up immediately or only after a preset period of time
(hotline after a timeout).
[1] "Different Displays in a HiPath 4000 Environment (Not in
HiPath 500)"
1
.
Ending the call also deactivates DTMF suffix-dial-
ing.
Your system may be configured so that you can
start DTMF suffix dialing immediately after set-
ting up a connection.
page 118
", and "#" to trans-
*