DURKOPP ADLER 610-10 Service Instructions Manual page 24

Assembling the thread cutter
Fig. 9: Assembling the thread cutter
(5) - Ball lever
(6) - Blade carrier
(7) - Screws
To assemble the thread cutter:
1. Position the thread cutter such that the blade carrier (6) fits over the
2. Insert both screws (7) and tighten.
3. Push the movable blade (9) to the right between the counter blade and
4. Tighten the blade to the blade carrier (6) with the screw (8).
Disassembling the carrier plate
Fig. 10: Disassembling and assembling the carrier plate
(1) - Screws
(2) - Carrier plate
To disassemble the carrier plate:
1. Remove both screws (1).
2. Carefully remove the carrier plate (2) with mechanics and cylinder (3).
22
⑤
⑥
ball lever (5).
the spring plate.
①
②
⑦ ⑧
(8) - Screw
(9) - Blade
(3) - cylinder
Service Instructions 610-10/630-10 - 01.0 - 12/2016
Working basis
⑨
③