Table of Contents
Advertisement
Adjusting the Supply Position
Use this option to adjust how much supply feeds out of the printer. The
range is between -99 to 99. The default is 0. You may need to adjust the
supply in or out to allow
♦
tags and labels to be removed.
♦
die cut labels to be removed easily.
From the Printer menu, select Supply Pos.
1.
Supply Position
+00
↵
Use A as shown in the following table:
↵
Press A to
Enter
Save the setting
When the setting you want is displayed, press A under ↵ to save the
2.
setting.
You return to the Printer menu.
3-8 System Administrator's Guide
+
Press A to
Set the position (+00)
1 st position
2 nd position
3 rd position
+
Press A to
Toggle between
positive and negative
Increase the setting
by 10
Increase the setting by 1
Advertisement
Table of Contents
