Device Pairing & Setup With Internet Connection; System Configuration With Internet Connection Using Sg888Zb Gateway - Salus SG888ZB System Manual

Section 4
SALUS wireless systems can be configured with an internet connection using the SG888ZB Gateway, or
without an internet connection using the AC10RF Coordinator. It is important to follow the instructions
that correspond to the desired configuration in the following pages. The configurations will be clearly
marked, "With Internet Connection" or "Without Internet Connection".
System Configuration with Internet Connection
using SG888ZB Gateway
Before beginning the system configuration, be sure that the SALUS Smart Home application
is downloaded to your mobile device. Links to the appropriate iOS or Android application
are included in Section 2, System Overview or on the SALUS website. You should have a
username & password for this application. Be sure to keep this information secure.
1 . Open the SALUS Smart Home application on your
mobile device . If you haven't already done so, log on
with your username and password . As noted in Section
3, Device Installation, the LED ring on the SG888ZB
Gateway should be blue .
The default SALUS Smart Home application screen includes a
brief explanation of the dashboard. Once you understand this
message, chose the "x" in the upper right corner to remove it.
2 . Select "Add new gateway" from the SALUS Smart
Home dashboard . A welcome screen appears showing
Activate your gateway prompting you to make sure your
gateway is connected to the router with an ethernet
cable and the LED light is solid blue .
3 . Press the multi button on top of the SG888ZB Gateway
once, so it flashes green .
Device Pairing & Setup
with Internet Connection
4 .1