Resetting The Sg888Zb Gateway Without Internet Connection; Resetting The Ac10Rf Coordinator Without Internet Connection - Salus SG888ZB System Manual

Section 6
Resetting the SG888ZB Gateway
without Internet Connection
To reset the SG888ZB Gateway to factory defaults without an
internet connection:
1 . Press and hold the multi button on top of the SG888ZB Gateway .
2 . When the LED flashes red, release the multi button . After approximately
10 seconds, the LED ring turns solid red indicating the default values are
loaded . All the devices connected to the gateway
will be deleted from the network and must be re-installed
as previously described .
Without an internet connection, the SG888ZB Gateway will remain solid red .
Resetting the AC10RF Coordinator
without Internet Connection
1 . Press and hold the pairing button on the AC10RF Coordinator for 10 seconds
2 . The LED light on the AC10 Coordinator will turn amber, indicating the system is resetting .
3 . When the system is reset, the LED light will turn red once again, indicating the system is
ready . All the devices connected to the gateway will be deleted from the network and must
be re-installed as previously described .
Resetting Factory Defaults
6 .2