Salus SG888ZB System Manual page 31

Section 4
1 . Open the SALUS Smart Home mobile application and select the drop down
menu from the upper right side of the screen select:
Equipment All Equipment

The SG888ZB Gateway will begin flashing red while it is searching for the devices. This will continue
until the pair process is complete. The AS20 Thermostat must be set to
the SALUS Smart Home application. COMPLETE step 3 before proceeding with pairing the ARV10RFM
Radiator Actuator.
2 . Use the Up arrow
to change to from
to .
4 . When the AS20WRF/BRF Thermostat
displays , press confirm
Device Pairing & Setup
with Internet Connection
Add New Equipment

3 . Then press confirm
.
Scan for Equipment

.
5 . When the display shows
press confirm
for it to appear on
The ASWRF Thermostat will
become visible on the SALUS
Smart Home application
,
.
4 .10