Section 6
Pairing Instructions
After installing Fan Coil Thermostats or Controllers and any optional SS909ZB Temperature
Sensors, be sure that power has been restored to the fan coil system and Fan Coil Thermostat .
When the Fan Coil Thermostat, Controller
or Remote is first powered, all segements
will be briefly displayed . The boot sequence
described previously will be displayed .
Joining the SG888ZB
Gateway Network
Step 1. Open the SALUS Smart Home application, select the drop-down menu from the upper right of the
screen and select: All Devices Add new device .
Module 5 – Connected Fan Coil Controls
Pairing Instructions – Fan Coil Controls
If the device is not connected to a network,
the device will display
minute countdown timer will start .
and a 10
6-1