Salus SG888ZB System Manual page 32

Section 4
6 . Select the Zigbee Digital
Control Thermostat,
checking the box . Press
the "Connect equipment"
button .
9 . Press and hold the pair button for 10 seconds to enter pairing mode on each actuator to be connected .
Device Pairing & Setup
with Internet Connection
7 . Give each thermostat a
descriptive name that
differentiates it from others
in the network and press
"Next" .
10 seconds
8 . Pressing the
advances to thermostat
setup . However, this can be
completed later . "Finish" to
complete the connection to
the wireless network .
The LED indicator will flash red.
icon
4 .11