As20Wrf/Brf Digital Thermostat Starting Sequence - Salus SG888ZB System Manual

Section 3
AS20WRF/BRF Digital Thermostat
Starting Sequence
When the batteries are first installed in the AS20 Thermostat, the following starting sequence
will occur .
Boot screen
The Zigbee software version
The starting sequence must be complete before pairing the AS20 Thermostat with the
SG888ZB Gateway or AC10RF Coordinator, and other devices.
Device Installation
A 1 ON OFF
1 2 3 4 5 6 7
Display check
(example only)
M12
B
PM
The Thermostat is ready to be paired
The MCU software version
(example only)
3 .5