As20Wrf/Brf Thermostat - Parameter Setup With Internet Connection - Salus SG888ZB System Manual

Section 7
AS20WRF/BRF Thermostat –
Parameter Setup with Internet Connection
If the SG888ZB Gateway is used and is connected to the internet, the SALUS Smart Home application
can be used to set up the parameters. Alternatively, the parameters can be entered directly on the
AS20WRF/BRF Thermostat. In either case, changes may take several minutes to take effect
To access the AS20WRF/BRF parameters from the SALUS Smart Home Application, follow the steps below .
1 . Select the thermostat icon
on the screen .
4 . Scroll down to access
parameters .
Setting Device Parameters
2 . Press the thermostat name
in the top left corner .
5 . Enter desired parameters see
table below for more info .
3 . Press the settings "gear" icon
to access parameters .
6 . When parameters are set,
scroll down and press, "Save" .
7 .10