As20Wrf/Brf Thermostat - Setting The Time - Salus SG888ZB System Manual

Section 7
AS20WRF/BRF Thermostat – Setting the Time
The time can be set directly on the AS20WRF/BRF User Interface or on the SALUS Smart Home
application, provided a SG888ZB Gateway is used and connected to the internet.
PM
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 . To set the time on the
AS20WRF/BRF Thermostat,
press & hold the confirm
button .
2 . Press the right arrow
to enter the time
format mode .
7 . Use the Up/Down Arrows
&
the flashing year value and
Press confirm
Setting Device Parameters
3 . Press confirm
accept . The 12/24 selection
is shown on the display .
4 . Use the right/left
arrows to select either
12 or 24 hours . Press
confirm
8 . Use the Up/Down Arrows
to set
the flashing month value
. and Press confirm
to
&
.
& to set
.
5 . Use the Up/Down Arrows
&
the flashing hour value .
6 . Press confirm
repeat to set the min . Then
Press confirm
9 . Use the Up/Down Arrows
&
the flashing day value and
Press confirm
to set
and
again .
to set
.
7 .4