As20Wrf/Brf Thermostat - Salus Smart Home Application - Advanced Functions & Parameters - Salus SG888ZB System Manual

Section 7
AS20WRF/BRF Thermostat – SALUS Smart Home
Application - Advanced Functions & Parameters
Function
Heating Control
Room Temperature Offset
Sensor Probe
Sensor Probe used as an air
sensor or floor sensor
Cooling Control
Valve Protection
Floor Sensor Limit for Cooling
Floor Sensor High Limit
Temperature
Floor Sensor Low Limit
Temperature
Do you allow to unlock from
your thermostat side?
Setting Device Parameters
Parameters
Default
± 1 .0°F [± 0 .5°C] ± 0 .50°F [± 0 .25°C]
± 1 .0°F [± 0 .5°C]
- 6 .0°F to + 6 .0°F
0°F [0°C]
- 3 .0°C to + 3 .0°C
No Sensor Connected
No Sensor
Connected
Sensor Probe Connected
Air Sensor
Floor Sensor
± 0 .50°F [± 0 .25°C]
± 1 .0°F [± 0 .5°C]
± 1 .0°F [± 0 .5°C]
Enabled
45°F to 113°F
45°F [7°C]
52°F [11°C]
11°C to 45°C
45°F to 113°F
50°F[10°C]
Yes
Value
TPI Time Proportional & Integral (TPI)
ON/OFF – Increment Resolution
ON/OFF – Increment Resolution
Thermostat reads Actual ± Offset Temperature
No sensor connected to S1/S2 on thermostat
A sensor is connected to S1/S2 on thermostat
Air Sensor Sensor for remote air temperature
Sensor for radiant floor temperature
ON/OFF – Increment Resolution
ON/OFF – Increment Resolution
Disabled ARV10RFM Protection Disabled
Enabled ARV10RFM Protection Enabled
Minimum floor temperature for cooling
7°C to 45°C
52°F 113°F
Maximum floor temperature for heating
Minimum floor target temperature
7°C to 45°C
Yes
Controls permission to unlock the parameters menu from
the thermostat user interface screen
No
Description
7 .12