Mendota ML39 Assembly, Installation And Operating Instructions page 81

Convection Blowers: The convection blowers are mounted at the rear of the fireplace. To remove the blowers first remove the
floorplate and burner from the firebox. Then unscrew the pilot bracket and air shutter components from the air box. Then
unscrew the airbox and lift it out of the fireplace. Next remove the explosion plate panels. The blowers are located under these
panels towards the rear of the fireplace. The blower assemblies are attached to the floor with two nuts. Remove the nuts and lift
the blower assemblies out of the fireplace.
Accent Light: The accent lights are mounted in the firebox top. The lens and retaining bracket is held on with 4 nuts.
Convection Air Blower System Parts
Figure 6-3 ML39 BLOWER ASSEMBLIES
85-03-01136 ML39 Page 81