Mendota ML39 Assembly, Installation And Operating Instructions page 22

Rough Framing Dimensions
The rough framing dimensions given are the
minimum allowed framing dimensions. Be sure
when planning the framing of the unit that
adequate space to hook up the gas and electrical
on the left side of the unit.
SPECIAL FRAMING NOTE:
If the fireplace is to be recessed in a cavity deeper than 22", all framing and finishing materials protruding past the front face of
this fireplace must be of the NON-COMBUSTIBLE variety.
WARNING: VENT IS NOT CENTERED ON THE UNIT
85-03-01136
Minimum Required Dimensions
DESCRIPTION
A
ENCLOSURE FRAMING WIDTH
B ENCLOSURE FRAMING DEPTH
C
ENCLOSURE FRAMING HEIGHT
D
ENCLOSURE CELING HEIGHT
E FINISH MATERIAL THICKNESS
F
UNIT BASE TO ROOM CEILING
G
UNIT BASE TO SIDE WALL
UNIT BASE TO 8" MANTEL
H
Figure 3-16 FRAMING DIMENSIONS
ML39
DIMENSION
(INCHES)
48
22
46
66 3/8
1
72
16
51
Page 22