Contents Of The Manual Packet; What Is Not Included With This; Unbolting Fireplace From Pallet; Appliance - Mendota ML39 Assembly, Installation And Operating Instructions

4.3 CONTENTS OF THE MANUAL PACKET

Once the outer box is removed, you will find the Fireplace body and a manual packet white box. This manual packet white box
includes the items shown in the table, below. Contact Mendota Technical Service if any parts are missing.
Glass Latch Tool #HA-77-00256
Must Leave with Homeowner.
Remote Control Transmitter # 05-02-00408. 3-AAA
Batteries # 65-06-01147.
Must Leave with Homeowner.
Backup Battery Holder #05-02-00345 & QTY 4- AA
Batteries #65-06-01147.
Must Leave with Homeowner.
Backup Power Harness #10-03-00128
Must Leave with Homeowner.
Light Bulb, G9 Xenon, 25w. #10-11-00020
Installation Required.
Two light lens kits are used on this fireplace.
Light Lens Assembly Packet # HA-88-00167
(Light Lens, Lens Retainer Bracket w/ gasket, four 10-
24 Nuts, Lens base gasket).
Installation Required.
Owner's Manual.
Must Leave with Homeowner.
4.4 WHAT IS NOT INCLUDED WITH THIS APPLIANCE?
Log set, firebox lining or decorative front are not included with this base Fireplace product. One of the many log set and media
options, firebox inner liner options, and decorative fronts options must be selected and purchased separately.

4.5 UNBOLTING FIREPLACE FROM PALLET

The Fireplace body is bolted to the pallet top surface using 5/16" X 1" Lag Screws in three points. One on each side and one or
more at the rear. Use a 1/2" socket and wrench to remove the lag screws and detach fireplace from the pallet top.
85-03-01136
This Manual
Figure 4-2 Manual Packet Contents
Figure 4-3 Unbolting Unit from Pallet
ML39 Page 48