Mendota ML39 Assembly, Installation And Operating Instructions page 18

Normal Surface Temperatures
WARNING: The supplied barrier screen must be installed , always, when this fireplace is in operation. Do
not place any object directly in front (within 60" from barrier screen surface) or directly above (on the
front edge o f the mantel). This is a heat ing appliance. Areas directly in front and above this appliance will
be very hot and can damage most house hold objects if placed too close. Keep Furniture pieces at least
60" away in front of the barrier screen surface.
HINT: To greatly reduce surface temperatures surrounding this Fireplace during operation, Mendota
recommends operating the integrated convect ion air blowers which aid in cooling all surrounding surfaces.
Mendota Fireplaces comply with ANSI Z21.88-2016 Standards for maximum surface temperatures on exposed "combustible"
surfaces adjacent to the Fireplace.
Be aware that surfaces in front of, above and adjacent to this heater appliance can be too hot to touch. As long as all required
clearances to combustibles are met and the required finishing materials are used, this appliance will perform safely. Note that
the exposed surfaces immediately surrounding the Fireplace can have surface temperatures that are too hot to touch. This level
of surface temperature is considered normal and does not indicate any hazardous situation.
Surround Face Temperatures
Areas of the breastplate directly above the top
convection air gap of this Fireplace can be very hot (too
hot to touch) and is deemed normal.
Mantel Temperatures
Mendota Fireplaces comply with ANSI Z21.88-2016
standards for maximum surface temperatures on
exposed "combustible" surfaces adjacent to the
Fireplace. Be aware that surface in front of, above and
adjacent to this heater appliance can be too hot to
touch. As long as all required clearances to
combustibles are met and the required finishing
materials are used, this appliance will perform safely.
Note that the exposed surfaces immediately
surrounding the Fireplace can have a surface
temperature too hot to touch. This level of surface
temperatures is considered normal and does not
indicate any hazardous situation.
WARNING: Surfaces surrounding this Fireplace can be very hot to the touch during operation. Carefully supervise children and
pets while this Fireplace is operating.
85-03-01136
Figure 3-12 Hot Zones
ML39 Page 18