Table of Contents
Advertisement
Skymetry WTU-14 Manual
the unit receives the request it will immediately send back a reply.
During this waiting period the web page will display the input and
output values in green italics until the updated information returns.
At the bottom of the screen is a time-stamp which indicates the date
and time of the last update. Note that clicking the Status Refresh
will use 5 to 7 data messages, depending on the amount of data
transferred. You can minimize the number of data messages by dis-
abling any inputs which are not being used.
Programming Refresh
The Programming Refresh command will refresh all Skymetry
WTU-14 programming as well as input/output status. The first
Programming Refresh is included as part of the activation fee and
will not increment the data message counter nor be applied to your
monthly allowance. You only need to click this button if you believe
that programming changes may have occurred locally, at the unit,
and you want to refresh the information on the web server.
Programming via the Web Page
You can change any parameter in your WTU-14 from the web page,
just as you would using the Skymetry PC Software. All program-
mable items will appear as Blue links. For the inputs you can click
on any item for that channel and the respective programming screen
will appear. If you change an item and click OK, the change will be
sent to your unit. This will take a few minutes to process. Similarly
you can change Output programming, Notification programming,
and Machine-to-machine programming.
Switching Outputs via the Web page
To switch an output, Login to the web page and click Outputs.
Next, click on the Output number you want to switch. On the pro-
gramming screen, locate the State field and select On or Off, then
click OK. The command to switch the output will be sent to your
unit. Note that this may take 1–2 minutes.
84
Advertisement
Table of Contents
