Table of Contents
Advertisement
Skymetry WTU-14 Manual
This screen displays the current status of all 6 analog inputs. If any
of the inputs were in alarm the Alarm State column would display
the word "Alarm." If the alarm was unacknowledged the Alarm
State would say "Alarm Unack" and a button would appear at the
bottom of the screen to acknowledge the alarm.
Analog Inputs Programming
Configuring the Input Name
The input Name is used to describe the condition being monitored.
It can be up to 16 characters.
44
Figure 3: Analog Inputs tab
Figure 4: Analog Inputs Properties
Advertisement
Table of Contents
