Skymetry WTU-14 Manual
T-Mobile
Telecorp
Tritel
Triton PCS
U.S. West
Verizon
VoiceStream
Wyndtell
Acknowledgment via E-mail or Text Message
The alarm from the Skymetry WTU-14 can be acknowledged by
replying to the alarm message that was sent to you. As long as you
received the message on a two-way data device, you can simply
reply back to send your acknowledgment. In the reply message,
just enter the alarm ID number in the message. For example, if the
alarm ID number was 1720, then you would reply with a "1720" in
your reply message to indicate to the WTU-14 that you received and
acknowledged the alarm message. A sample acknowledgment mes-
sage is shown below:
To: 1123350@mobilemessage.com
From: Mike@mycompany.com
1720
Additional Information
If another alarm occurs while the unit is delivering messages for a
previous alarm, the second alarm will be handled after the first is
acknowledged.
You can use tier escalation to organize the destination delivery. Set
each destination to its own tier level and set the delay to two min-
utes. In this case a new message will be sent every two minutes to
the next tier level.
Rearranging the destination order can be done simply by changing
the Tier Levels.
74
10digitphonenumber@voicestream.net
10digitphonenumber@mobile.att.net
10digitphonenumber@mobile.att.net
10digitphonenumber@mobile.att.net
10digitphonenumber@uswestdatamail.com
10digitphonenumber@vtext.com
10digitphonenumber@voicestream.net
number@wyndtell.com