Table of Contents
Advertisement
Chapter 10: Skymetry Web Page
The Skymetry Web Page is where you can check status, monitor
data message usage, make programming changes, and even control
outputs from any internet connected computer. In order for your
unit to be accessible via the web page you must first change the
password in your unit and then log out. This will instruct the unit
to register with the Skymetry web server, setup an account for your
unit, and perform a Full Programming Update. Note that it may
take 1 to 2 hours for the web server to receive all of the program-
ming information from your Skymetry WTU-14. Do not make any
programming changes to your unit during this period. This initial
Full Update will occur automatically and is included in your activa-
tion fee and does not count toward your monthly allowance.
Once the Skymetry web server has finished receiving the updates
from your unit you can go to www.skymetry.com, enter your SkyID
and Password, and click Login. The web page for your Skymetry
WTU-14 will be displayed. The web page presents a view of the
system which is very similar to the Skymetry PC Software, except
for the fact that it is a snapshot of information from a specific point
in time—it is not updating in real-time. To retrieve the latest values
you must click either the Status Refresh or Programming Refresh
links.
Note: It is highly recommended that if at any
time you make any programming changes locally
(at the unit via the serial port) that you click the
Programming Refresh link on the web page soon
thereafter, to ensure that the information you are
viewing is up to date. This will also ensure that the
alarm history information will also be accurate.
Status Refresh
You can retrieve the latest input and output values by clicking
the Status Refresh link. This will send a message to the WTU-14
requesting the latest input and output status information. When
Chapter 10: Web Page
83
Advertisement
Table of Contents
