Table of Contents
Advertisement
Chapter 3: Software Instllation
Enter the SkyID, Name, Description, and Comm Port settings for
this unit. The unit Name can be up to 16 characters, the Description
can be up to 30 characters. Click OK. Now click the Connect but-
ton and the software should connect and start downloading the pro-
gramming from the unit. If this is the first time, you will have to
enter the SkyID. A warning message will appear to prompt you.
Figure 3: SkyID Warning message
Figure 4: Programming Download in progress
If this was a new unit (factory default settings) the Name you
entered on the edit screen will automatically be copied into the unit.
After downloading the programming, the main Skymetry WTU-14
window will appear (see below).
Figure 5: Main Skymetry Window: System Tab
This is a good time to enter a Password. The Password, while not
required for local access, is required for all remote communication.
The password can be up to 8 characters. Click Apply when finished.
37
Advertisement
Table of Contents
