Table of Contents
Advertisement
Skymetry WTU-14 Manual
Tier 1 destinations:
Chuck
Mary
Sue
Derek
Dave
Tier Delay Time: 60 minutes
An alarm occurs at 8:00
The Skymetry WTU-14 starts sending alarm messages to members
of Tier 1.
No one acknowledges the alarm.
At 9:00
the Tier delay has expired and the unit begins to send
PM
alarm messages to members of Tier 2.
At 9:30
the WTU-14 receives an acknowledgement message and
PM
the unit stops the notification process.
The people in Tier 3 do not get contacted.
Alarm Acknowledgment
Acknowledging an alarm will halt the alarm notification process.
Voice notification alarms must be acknowledged during the original
phone call. E-mail, Alphanumeric pager, and Cell phone alarms can
be acknowledged by replying back to the original alarm message or
by sending the unit a message with the alarm ID number. The sec-
tions below detail the procedure to acknowledge an alarm.
Alarm Acknowledgment—Voice Notification
"Hello, Sensaphone Inc. has a message for 'Dave' <destination name>."
"To accept the message press 1."
"To cancel the message press 2."
{press 1 to hear the alarm message}
"Skymetry alarm at 'Oak Station' <unit name>, SkyID number '1123350'
<skyid>."
"Contact 1, 'Security' <input name> is in alarm."
"To acknowledge send 1101
"End of message"
78
Tier 2 destinations:
Janet
George
Ron
Jason
Carmen
PM
<alarm ID>
Tier 3 destinations:
Morton
Zach
Tony
"
Advertisement
Table of Contents
